What's New

Storing Excess Electricity as Hydrogen

A liquid hydrogen storage tank is in view as NASA's mobile launcher (ML) atop crawler-transporter 2 makes its way up the ramp at Launch Pad 39B on Aug. 31, 2018, at the agency's Kennedy Space Center in Florida. The ML will undergo a fit check, followed by several days of systems testing. The 380-foot-tall mobile launcher is equipped with the crew access arm and several umbilicals that will provide power, environmental control, pneumatics, communication and electrical connections to NASA's Space Launch System (SLS) and Orion spacecraft. Exploration Ground Systems is preparing the ground systems necessary to launch SLS and Orion on Exploration Mission-1, missions to the Moon and on to Mars.

While energy sources such as wind and solar are great at producing emissions-free electricity, they depend on the sun and the wind, so supply doesn’t always meet the demand. Likewise, nuclear power plants operate more efficiently at maximum capacity so that electricity generation can’t be easily ramped up or down to match demand.

For decades, energy researchers have tried to solve one big challenge: How do you store excess electricity so it can be released back onto the grid when it’s needed?

Recently, researchers at Idaho National Laboratory helped answer that challenge by developing a new electrode material for an electrochemical cell that can efficiently convert excess electricity and water into hydrogen. When demand for electricity increases, the electrochemical cell is reversible, converting hydrogen back into electricity for the grid. The hydrogen could also be used as fuel for heat, vehicles or other applications.

The results appeared online this week in the journal Nature Communications.

Researchers have long recognized the potential of hydrogen as an energy storage medium, said Dong Ding, a senior staff engineer/scientist and chemical processing group lead at INL.

A new triple-conducting oxide allows protons, oxygen ions and electrons to move through, allowing generation of either hydrogen or electricity through reversible operation in a protonic ceramic electrochemical cell.

“The energy storage grand challenge, with its diverse research and development needs, gave rise to more opportunities for hydrogen,” said Ding. “We are targeting hydrogen as the energy intermediate to efficiently store energy.”

Ding and his colleagues improved one type of electrochemical cell called a protonic ceramic electrochemical cell (PCEC), which uses electricity to split steam into hydrogen and oxygen.

However, in the past, these devices had limitations, especially the fact that they operate at temperatures as high as 800 degrees C. The high temperatures require expensive materials and result in faster degradation, making the electrochemical cells cost prohibitive.

In the paper, Ding and colleagues describe a new material for the oxygen electrode—the conductor that facilitates the water splitting and oxygen reduction reactions simultaneously. Unlike most electrochemical cells, this new material—an oxide of a compound called a perovskite—allows the cell to convert hydrogen and oxygen into electricity without additional hydrogen.

Previously, Ding and his colleagues developed a 3D meshlike architecture for the electrode that made more surface area available to split the water into hydrogen and oxygen. Together, the two technologies—the 3D mesh electrode and the new electrode material—allowed for self-sustainable, reversible operation at 400 to 600 degrees C.

“We demonstrated the feasibility of reversible operation of the PCEC at such low temperatures to convert generated hydrogen in hydrolysis mode to electricity, without any external hydrogen supply, in a self-sustaining operation,” Ding said. “It’s a big step for high temperature electrolysis.”

While past oxygen electrodes conducted only electrons and oxygen ions, the new perovskite is “triple conducting,” Ding said, meaning it conducts electrons, oxygen ions and protons. In practical terms, the triple-conducting electrode means the reaction happens faster and more efficiently, so the operating temperature can be reduced while maintaining good performance.

For Ding and his colleagues, the trick was figuring out how to add the element to the perovskite electrode material that would give it the triple-conducting properties—a process called doping. “We successfully demonstrated an effective doping strategy to develop a good triple-conducting oxide, which enables good cell performance at reduced temperatures,” said Hanping Ding, a materials scientist and engineer for Idaho National Laboratory’s Chemical Processing Group.

In the future, Dong Ding and his colleagues hope to continue improving the electrochemical cell by combining materials innovation with cutting-edge manufacturing processes so the technology can be used at an industrial scale.

About Tom Breunig (173 Articles)
Tom Breunig is principal at Cleantech Concepts, a market research firm tracking R&D projects in the cleantech sector. He is a technology industry veteran and former international marketing and communications executive who has worked with organizations in semiconductor design, water monitoring, energy efficiency and environmental sensing. He has spoken at numerous technology and energy conferences.
Contact: Twitter

Leave a comment

Your email address will not be published.


*


This site uses Akismet to reduce spam. Learn how your comment data is processed.